Details

---

BUY TDA3616T https://www.utsource.net/itm/p/12608334.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	12	-	30	V	Operating supply voltage range
Output Power	Pout	-	65	-	W	Maximum output power per channel
Frequency Response	fR	20	-	20k	Hz	Flat frequency response
Signal-to-Noise Ratio	SNR	-	90	-	dB	Ratio of signal power to noise power
Total Harmonic Distortion	THD	-	0.1	-	%	Distortion at rated output power
Quiescent Current	Iq	-	50	-	mA	Current consumption in standby mode
Protection Features	PF	-	-	-	-	Overcurrent, overtemperature, and short-circuit protection

Instructions for TDA3616T

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Ensure the supply voltage is within the specified range (12V to 30V).

2. Grounding:

   • Connect the ground terminal of the power supply to the GND pin.

3. Input Signal Connection:

   • Connect your audio source to the input pins. Ensure the signal level is appropriate for the amplifier’s input sensitivity.

4. Speaker Connections:

   • Connect speakers to the output terminals. Make sure the impedance of the speakers matches the amplifier’s specifications.

5. Heat Dissipation:

   • Install a suitable heatsink to ensure proper heat dissipation, especially under high-power operation.

6. Protection Circuitry:

   • The TDA3616T includes built-in protection against overcurrent, overtemperature, and short circuits. Monitor these features during operation.

7. Operation:

   • Turn on the power supply after ensuring all connections are secure.
   • Adjust the volume or gain controls as needed for optimal performance.

8. Safety Precautions:

   • Avoid operating the device beyond its specified limits to prevent damage.
   • Keep the device in a well-ventilated area to avoid overheating.

(For reference only)