Details

---

BUY MBR3045PT. https://www.utsource.net/itm/p/12608342.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	45	V
Maximum RMS Voltage	VRMS	32	V
Maximum Average Rectified Output Current (at T = 100掳C)	IORM	30	A
Maximum Average Rectified Output Current (at T = 75掳C)	IORM	40	A
Maximum Non-Repetitive Peak Surge Current (8.3/400 渭s)	IFSM	200	A
Maximum DC Blocking Current	IR	5	渭A
Forward Voltage at IF = 30A, T = 25掳C	VF	0.95	V
Junction Operating Temperature Range	TJ	-55 to 175	掳C
Storage Temperature Range	TSTG	-65 to 150	掳C
Case Temperature Range	TC	-55 to 150	掳C

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a heatsink to maintain proper operating temperatures.
   • Use thermal compound between the device and heatsink to enhance heat dissipation.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse polarity which can lead to device failure.
   • Use short and thick wires to minimize inductance and resistance.

3. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it does not exceed 175掳C.
   • If operating at high current levels, consider forced air cooling or liquid cooling.

4. Surge Handling:

   • The device can handle non-repetitive peak surge currents up to 200A for 8.3/400 渭s. Ensure that any surge conditions are within these limits.

5. Storage:

   • Store the device in a dry environment with temperatures between -65掳C and 150掳C to prevent damage.

6. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the leads.
   • Use anti-static precautions to prevent electrostatic discharge (ESD) damage.

7. Testing:

   • Before installing the device in a circuit, perform initial tests to ensure it meets the specified parameters.

8. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)