Details

---

BUY G6D-1A-ASI-12VDC https://www.utsource.net/itm/p/12608362.html

Parameter	Value
Model	G6D-1A-ASI-12VDC
Type	Photoelectric Sensor
Operating Voltage	12 VDC
Current Consumption	40 mA (max)
Detection Type	Diffuse Reflective
Response Time	5 ms (typical)
Detection Distance	100 mm to 300 mm (adjustable)
Output Type	NPN Open Collector
Output Current	100 mA (max)
**Ambient Light Immunity	10,000 lux
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Humidity Range	5% to 95% RH (non-condensing)
Housing Material	PBT
Lens Material	Polycarbonate
Mounting	M5 Threaded Stud
Cable Length	2 m (standard)
Protection Class	IP67

Instructions

1. Power Supply:

   • Connect the sensor to a 12 VDC power supply.
   • Ensure the power supply is stable and within the specified range.

2. Wiring:

   • Connect the brown wire to the positive terminal of the power supply.
   • Connect the blue wire to the negative terminal of the power supply.
   • Connect the black wire to the input of the control device (load).

3. Installation:

   • Mount the sensor using the M5 threaded stud.
   • Ensure the sensor is securely fastened and aligned with the target object.

4. Adjustment:

   • Use the sensitivity adjustment potentiometer to set the detection distance.
   • Turn the potentiometer clockwise to increase sensitivity and counterclockwise to decrease sensitivity.

5. Operation:

   • When an object enters the detection range, the sensor will activate the output.
   • The output will switch to ground (NPN open collector), allowing current to flow through the load.

6. Maintenance:

   • Regularly inspect the sensor for any physical damage or dirt on the lens.
   • Clean the lens with a soft, dry cloth if necessary.

7. Precautions:

   • Do not exceed the maximum operating voltage or current ratings.
   • Avoid exposing the sensor to environments outside the specified temperature and humidity ranges.
   • Ensure proper grounding to prevent electrical interference.

(For reference only)