Details

---

BUY MCP2200-I-SS https://www.utsource.net/itm/p/12608367.html

Parameter	Description	Value/Range
Package Type	The type of package for the device	SSOP-20 (I)
Operating Voltage	Supply voltage range	3.0V to 5.5V
Interface Type	Communication interface	USB to UART/SPI/I2C
Data Rate	Maximum data transfer rate	Up to 1 Mbps (SPI), 115.2 kbps (UART)
Operating Temperature	Temperature range for operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-65°C to +150°C
GPIO Pins	Number of General Purpose Input/Output pins	8
USB Compliance	USB specification compliance	USB 2.0 Full Speed
Programmable Memory	EEPROM size for user programmable memory	1 Kbit

Instructions for MCP2200-I-SS:

1. Power Supply Connection:

   • Connect VDD to a stable power supply within the operating voltage range.
   • Ensure proper decoupling capacitors are placed close to the VDD pin.

2. USB Interface Setup:

   • Connect the USB D+ and D- lines to the respective pins on the MCP2200.
   • Use appropriate pull-up resistors on the D+ line as required by USB specifications.

3. Peripheral Interface Configuration:

   • Choose the desired peripheral interface (UART, SPI, or I2C) through software configuration.
   • Set up the corresponding interface pins according to the datasheet.

4. GPIO Initialization:

   • Configure GPIO pins as input or output in your application code.
   • Utilize internal pull-up resistors if necessary.

5. Firmware Installation:

   • Load the appropriate firmware onto the MCP2200 using the provided development tools.
   • Follow the manufacturer’s guidelines for firmware updates.

6. EEPROM Usage:

   • Access the EEPROM for storing configuration settings or other non-volatile data.
   • Use the provided API functions to read from and write to the EEPROM.

7. Testing and Validation:

   • Test the connection and communication with the selected peripheral interface.
   • Validate functionality under different operating conditions and temperatures.

(For reference only)