Details

---

BUY BUW12A https://www.utsource.net/itm/p/12608369.html

Parameter	Symbol	Min	Typ	Max	Unit
Continuous Drain Current	ID	-	30	-	A
Pulse Drain Current (t = 10 ms)	Ipp	-	45	-	A
Gate-Source Voltage	VGS	-10	-	10	V
Drain-Source Breakdown Voltage	BVdss	60	-	-	V
RDS(on) at VGS = 10V	RDS(on)	-	4.5	-	m惟
Gate Charge	Qg	-	87	-	nC
Total Power Dissipation	PD	-	110	-	W
Junction Temperature	Tj	-55	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the BUW12A with care to avoid mechanical stress.
   • Ensure proper heat sinking to manage the power dissipation.

2. Electrical Connections:

   • Connect the drain (D) to the high-voltage side of the circuit.
   • Connect the source (S) to the low-voltage side or ground.
   • Apply the gate (G) voltage relative to the source (S).

3. Operating Conditions:

   • Do not exceed the maximum ratings for continuous and pulse currents, gate-source voltage, and drain-source breakdown voltage.
   • Ensure the junction temperature remains within the specified range to prevent thermal damage.

4. Thermal Management:

   • Use appropriate heatsinks to maintain the junction temperature below 150掳C.
   • Consider forced air cooling for high-power applications.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Protect from static discharge by storing in anti-static packaging.

6. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Monitor temperature and current levels during operation to ensure safe and reliable performance.

(For reference only)