Details

---

BUY DS2E-S-DC5V https://www.utsource.net/itm/p/12608380.html

Parameter	Description	Value
Part Number	DS2E-S-DC5V	-
Type	Reed Relay	-
Coil Voltage	Rated Coil Voltage	5V DC
Coil Current	Operating Current	30 mA (max)
Power Consumption	Power Consumption at Rated Voltage	150 mW (max)
Contact Form	Contact Configuration	SPDT (Single Pole Double Throw)
Contact Rating	Maximum Switching Capacity	2A @ 30V DC, 1A @ 125V AC
Insulation Resistance	Minimum Insulation Resistance	100 M惟 (min) at 500V DC
Dielectric Strength	Dielectric Strength Between Contacts and Coil	1000V AC for 1 minute
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Mechanical Life	Mechanical Life (No Load)	10 million operations
Electrical Life	Electrical Life (Rated Load)	100,000 operations
Dimensions	Dimensions (L x W x H)	17.8 mm x 10.2 mm x 10.2 mm
Weight	Weight	2.5 g (approx.)

Instructions for Use:

1. Installation:

   • Ensure that the relay is mounted on a PCB or chassis with proper mechanical support.
   • Avoid exposure to excessive mechanical stress or vibration.

2. Coil Connection:

   • Connect the coil terminals to the appropriate 5V DC power supply.
   • Ensure the polarity is correct to avoid damage to the relay.

3. Contact Connection:

   • Connect the load to the common (C) and normally open (NO) or normally closed (NC) contacts as required.
   • Do not exceed the maximum contact ratings to prevent damage or premature failure.

4. Environmental Considerations:

   • Operate the relay within the specified temperature range to ensure reliable performance.
   • Protect the relay from moisture, dust, and corrosive environments.

5. Testing:

   • Test the relay under no-load conditions before connecting it to the actual load.
   • Verify the correct operation of the contacts using a multimeter or continuity tester.

6. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if any issues are detected to maintain system reliability.

7. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.

(For reference only)