Details

---

BUY Q6016RH4 https://www.utsource.net/itm/p/12608384.html

Parameter	Description	Value
Part Number	Full Part Number	Q6016RH4
Type	Device Type	MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor)
Package	Package Type	TO-220AB
Polarity	N-Channel or P-Channel	N-Channel
VDSS	Drain-to-Source Voltage	60V
RDS(on)	On-State Resistance at VGS = 10V	16m惟 (max)
ID	Continuous Drain Current	100A
PTOT	Total Power Dissipation	150W
TJ	Junction Temperature Range	-55掳C to +175掳C
Qg	Total Gate Charge	280nC (max)
Qoss	Output Capacitance Charge	33nC (max)
Eoss	Energy Stored in Output Capacitance	1.5渭J (max)
fSW	Switching Frequency	100kHz (typical)
Storage Temperature Range	Storage Temperature	-55掳C to +150掳C
Lead Finish	Lead Finish	Matte Tin

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle the device with care to prevent mechanical damage.
   • Avoid touching the leads or the die directly to prevent electrostatic discharge (ESD).

2. Mounting:

   • Ensure proper heat sinking to manage the thermal dissipation.
   • Use a thermal interface material (TIM) between the device and the heatsink for better thermal conductivity.
   • Follow the recommended PCB layout guidelines to ensure optimal performance.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short and wide traces for high-current paths to minimize inductance and resistance.
   • Ensure that the gate drive circuit provides sufficient voltage and current to turn the MOSFET on and off quickly.

4. Thermal Management:

   • Monitor the junction temperature to ensure it stays within the specified range.
   • Use a thermal management solution appropriate for the power dissipation requirements.

5. Testing:

   • Test the device under controlled conditions to verify its performance.
   • Use a suitable test setup to measure parameters such as R_DS(on), V_DSS, and I_D.

6. Safety:

   • Always follow safety guidelines when handling high-voltage and high-current circuits.
   • Use appropriate protective equipment and follow all relevant safety standards.

(For reference only)