Details

---

BUY NJM072BL https://www.utsource.net/itm/p/12608391.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7	-	5.5	V
Input Offset Voltage	VIO	Initial	-	1.0	-	mV
Input Bias Current	IB	VI = 卤10V, f = 1kHz	-	1.0	-	pA
Slew Rate	SR	RL = 10k惟	-	0.4	-	V/渭s
Bandwidth	GBW	AV = +1, VS = 卤5V	-	1.0	-	MHz
Output Voltage Swing	VOS	RL = 10k惟, f = 1kHz	-	卤3.8	-	V
Quiescent Current	IQ	No signal	-	0.8	-	mA

Instructions for Use

1. Supply Voltage: Operate the NJM072BL within the specified supply voltage range of 2.7V to 5.5V to ensure stable performance and avoid damage.

2. Input Signals: Ensure that input signals do not exceed the power supply voltages to prevent distortion or potential damage to the device.

3. Biasing and Feedback: Properly bias the inputs and use appropriate feedback networks to achieve desired gain and stability characteristics.

4. Power Supply Decoupling: Place a decoupling capacitor (typically 0.1 渭F) close to the power supply pins to reduce noise and transient effects.

5. Output Load: The output can swing within 卤3.8V of the supply rails when connected to a 10k惟 load at 1kHz. Ensure the load resistance is suitable for your application.

6. Operating Temperature Range: The device is designed to operate within the commercial temperature range (-20掳C to +85掳C). Ensure environmental conditions are within these limits for reliable operation.

7. Handling Precautions: Handle the device with care to avoid static discharge, which can damage sensitive components. Use proper ESD protection measures during handling and assembly.

(For reference only)