Details

---

BUY AM29BL802CB-65RZE https://www.utsource.net/itm/p/12608394.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	2.7	-	3.6	V	Operating range
Standby Current	ISB	-	10	20	渭A	At Vcc = 3.0V, Ta = 25掳C
Active Current	IOP	-	50	100	mA	During read operation, Vcc = 3.0V, Ta = 25掳C
Access Time	tACC	65	-	-	ns	From CE# low to valid output data
Output High Level	VOH	2.4	-	Vcc	V	At IOL = -4mA, Vcc = 3.0V
Output Low Level	VOL	0	-	0.4	V	At IOH = 4mA, Vcc = 3.0V
Input High Level	VIH	2.0	-	Vcc	V	Minimum input high level voltage
Input Low Level	VIL	0	-	0.8	V	Maximum input low level voltage
Data Retention Time	tRET	-	20	-	years	Data retention at Ta = 85掳C
Operating Temperature	Ta	-40	-	85	掳C	Industrial temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 3.6V.
   • Avoid connecting the device to voltages outside this range to prevent damage.

2. Current Considerations:

   • The standby current (ISB) should be monitored to ensure it does not exceed 20渭A to minimize power consumption.
   • During active operations, the current (IOP) can reach up to 100mA, so ensure the power supply can handle this load.

3. Timing Parameters:

   • The access time (tACC) is 65ns, which is the time from when the chip enable (CE#) goes low to when valid data is available on the outputs.
   • Ensure that all timing requirements are met to avoid data corruption or incorrect operation.

4. Signal Levels:

   • The output high level (VOH) should be at least 2.4V and can go up to the supply voltage (Vcc).
   • The output low level (VOL) should be no more than 0.4V.
   • Input signals should be within the specified levels (VIH and VIL) to ensure proper operation.

5. Environmental Conditions:

   • The device is rated for industrial operating temperatures ranging from -40掳C to 85掳C.
   • Store the device in a temperature range of -65掳C to 150掳C to ensure long-term reliability.

6. Data Retention:

   • The device retains data for up to 20 years at a temperature of 85掳C. Ensure that the device is stored and operated within recommended conditions to maintain data integrity.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling and installing the device.

8. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress and ensure reliable connections.

By following these parameters and instructions, you can ensure optimal performance and longevity of the AM29BL802CB-65RZE device.

(For reference only)