Details

---

BUY BUP313D https://www.utsource.net/itm/p/12608425.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VDD	2.7	-	5.5	V
Output Current (Sink)	IOL	-	100	-	mA	@ VDD = 5V, VOUT = 0V
Output Current (Source)	IOH	-	20	-	mA	@ VDD = 5V, VOUT = 5V
Input Voltage (High)	VIH	2.0	-	5.5	V
Input Voltage (Low)	VIL	0	-	0.8	V
Propagation Delay Time	tPD	-	10	-	ns	@ VDD = 5V, TA = 25掳C
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Using BUP313D:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect VDD to the positive power supply and GND to the ground.

2. Input Signals:

   • Apply input signals (VIH or VIL) within the specified voltage levels:
     • High Level (VIH): 2.0V to 5.5V
     • Low Level (VIL): 0V to 0.8V

3. Output Current:

   • The device can sink up to 100mA and source up to 20mA.
   • Ensure that the load connected to the output does not exceed these current limits.

4. Propagation Delay:

   • The typical propagation delay time (tPD) is 10ns at 25掳C and VDD = 5V.
   • This value may vary with temperature and supply voltage.

5. Operating Temperature:

   • The device is designed to operate within the temperature range of -40掳C to 85掳C.
   • Avoid operating the device outside this range to prevent damage.

6. Storage Temperature:

   • Store the device in an environment where the temperature ranges from -65掳C to 150掳C.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge (ESD).
   • Use appropriate ESD protection measures when handling and soldering the device.

8. Mounting and Soldering:

   • Follow the recommended soldering profile provided by the manufacturer.
   • Ensure proper thermal management to avoid overheating during soldering.

9. Testing:

   • After assembly, test the device under normal operating conditions to ensure it meets the specified performance parameters.

10. Documentation:

    • Refer to the datasheet and application notes for more detailed information and specific use cases.

(For reference only)