Details

---

BUY TLC272 https://www.utsource.net/itm/p/12608431.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	20	V
Input Voltage Range	VI	VCC = 5V	0	-	5	V
Output Voltage Swing	VO	VCC = 5V, No Load	0.1	-	4.9	V
Input Offset Voltage	VOS	VCC = 5V, TA = 25掳C	-1	0	1	mV
Input Bias Current	IB	VCC = 5V, TA = 25掳C	-50	0	50	nA
Input Offset Current	IOS	VCC = 5V, TA = 25掳C	-10	0	10	nA
Slew Rate	SR	VCC = 5V, TA = 25掳C	0.3	-	0.6	V/渭s
Quiescent Current	IQ	VCC = 5V, TA = 25掳C	20	40	60	渭A
Common-Mode Rejection Ratio	CMRR	VCC = 5V, TA = 25掳C	80	-	100	dB
Power Supply Rejection Ratio	PSRR	VCC = 5V, TA = 25掳C	80	-	100	dB

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 20V.
   • Connect the ground (GND) pin to the system ground.

2. Input Signals:

   • The input voltage range should be between 0V and V_CC.
   • Avoid exceeding the input voltage limits to prevent damage to the device.

3. Output Configuration:

   • The output voltage swing is typically from 0.1V to V_CC - 0.1V.
   • For optimal performance, ensure the load does not exceed the output current capability of the op-amp.

4. Biasing and Offsets:

   • The input bias current and input offset current are very low, making the TLC272 suitable for high-impedance applications.
   • Use appropriate compensation techniques if the input offset voltage needs to be minimized.

5. Slew Rate:

   • The slew rate is relatively low, so avoid using the TLC272 in applications requiring fast signal transitions.

6. Quiescent Current:

   • The quiescent current is low, which is beneficial for battery-powered or low-power applications.

7. Common-Mode and Power Supply Rejection:

   • The TLC272 has good common-mode and power supply rejection ratios, which help in reducing noise and maintaining signal integrity.

8. Temperature Considerations:

   • The parameters provided are typical at 25掳C. Performance may vary at different temperatures, so refer to the datasheet for temperature-dependent characteristics.

9. Handling:

   • Handle the TLC272 with care to avoid static damage. Use proper ESD protection when handling the device.

10. Storage:

    • Store the device in a dry, cool place to prevent moisture damage. Follow recommended storage conditions as specified in the datasheet.

(For reference only)