Details

---

BUY LA4705N https://www.utsource.net/itm/p/12608448.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	Vcc		4.5		16	V
Quiescent Current	IQ	No signal		20		mA
Output Power	Po	RL = 8惟, THD = 10%		1.2		W
Total Harmonic Distortion	THD	Po = 1W, RL = 8惟		0.5		%
Signal-to-Noise Ratio	SNR	A-weighted		75		dB
Input Sensitivity	Vi	Po = 1W, RL = 8惟		200		mV
Input Impedance	Zi			47		k惟
Operating Temperature	Topr		-25		85	掳C
Storage Temperature	Tstg		-40		125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 16V.
   • Use a stable power supply to avoid noise and instability.

2. Quiescent Current:

   • The quiescent current is typically 20mA with no signal input. This helps in power management and thermal stability.

3. Output Power:

   • The typical output power is 1.2W into an 8惟 load with a total harmonic distortion (THD) of 10%. Adjust the load impedance to match this specification for optimal performance.

4. Total Harmonic Distortion:

   • At 1W output power and an 8惟 load, the THD is typically 0.5%. This ensures high audio quality.

5. Signal-to-Noise Ratio:

   • The SNR is typically 75dB (A-weighted), indicating a good level of noise suppression.

6. Input Sensitivity:

   • For 1W output power into an 8惟 load, the input sensitivity is typically 200mV. Ensure the input signal level is appropriate to avoid clipping or under-driving the amplifier.

7. Input Impedance:

   • The input impedance is typically 47k惟. This value should be considered when connecting the input source to ensure proper impedance matching.

8. Operating Temperature:

   • The operating temperature range is from -25掳C to 85掳C. Ensure the device operates within this range to avoid thermal damage.

9. Storage Temperature:

   • The storage temperature range is from -40掳C to 125掳C. Store the device in a suitable environment to prevent damage.

10. Mounting and Layout:

    • Use a PCB layout that minimizes noise and interference. Place decoupling capacitors close to the power pins to stabilize the supply voltage.

11. Protection:

    • Implement overvoltage and short-circuit protection circuits to safeguard the LA4705N from potential damage.

12. Testing:

    • Before finalizing the design, test the amplifier under various conditions to ensure it meets the required specifications and performance criteria.

(For reference only)