Details

---

BUY RF2001TM3SW https://www.utsource.net/itm/p/12608463.html

Parameter	Description	Value/Range
Part Number	RF2001TM3SW	-
Type	RF Switch	-
Function	Single-Pole, Three-Throw (SP3T) Switch	-
Frequency Range	Operating Frequency	30 MHz to 6 GHz
Insertion Loss	Loss through the switch when it is in the "on" state	< 0.4 dB
Isolation	Degree of signal separation between ports when switch is in the "off" state	> 35 dB
VSWR	Voltage Standing Wave Ratio	< 1.2:1
Power Handling	Maximum RF Power Handling	30 dBm (1 W)
Control Voltage	Voltage required to switch states	0 V (Off), 3 V (On)
Supply Voltage	DC Supply Voltage	3 V
Current Consumption	Current drawn by the device when active	< 1 mA
Operating Temperature	Temperature range for reliable operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-55掳C to +125掳C
Package Type	Type of package	SOT-23-3
Dimensions	Physical dimensions of the package	2.9 mm x 1.6 mm x 1.0 mm

Instructions for Use:

1. Power Supply: Ensure that the supply voltage is within the specified range (3 V). The device should not be operated outside this range to avoid damage.
2. Control Signals: Apply the control voltage (0 V or 3 V) to the appropriate control pin to switch between states. Ensure that the control signals are clean and stable.
3. Signal Path: Connect the RF input and output ports correctly. The switch can handle signals up to 30 dBm (1 W) within the specified frequency range.
4. Grounding: Properly ground the device to ensure optimal performance and minimize interference.
5. Temperature Considerations: Operate the device within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
6. Handling: Handle the device with care to avoid physical damage. Use appropriate ESD protection when handling the device.
7. Mounting: Follow the recommended PCB layout and mounting guidelines to ensure proper thermal management and electrical performance.

(For reference only)