Details

---

BUY G80N60UFD. https://www.utsource.net/itm/p/12608489.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Breakdown Voltage	BVdss	-	600	-	V	VDSS = 600V, ID = 1mA
Continuous Drain Current	ID	-	8.0	-	A	Tc = 25掳C
Continuous Drain Current	ID	-	5.0	-	A	Tc = 75掳C
Pulse Drain Current	Ibm	-	32	-	A	t = 10ms, Duty Cycle = 1%
Gate-Source Voltage	VGS	-20	0	20	V	-
Gate Charge	Qg	-	39	-	nC	VGS = 15V, ID = 8A
Input Capacitance	Ciss	-	1280	-	pF	VDS = 400V, f = 1MHz
Output Capacitance	Coss	-	360	-	pF	VDS = 400V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	260	-	pF	VDS = 400V, f = 1MHz
On-State Resistance	RDS(on)	-	0.85	-	惟	VGS = 10V, ID = 8A, Tc = 25掳C
Total Power Dissipation	PD	-	100	-	W	Tc = 25掳C
Junction Temperature	TJ	-55	-	150	掳C	-
Storage Temperature	Tstg	-55	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Handle with care to avoid damage to the leads and body.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use appropriate gate drive circuits to ensure reliable operation.

3. Thermal Management:

   • Use a heatsink or thermal interface material to dissipate heat effectively.
   • Monitor the junction temperature to prevent overheating.

4. Gate Drive:

   • Apply a gate-source voltage (VGS) within the specified range to turn the MOSFET on and off.
   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).

5. Overvoltage Protection:

   • Implement overvoltage protection circuits to prevent damage from transient voltages exceeding the breakdown voltage.

6. Storage and Transportation:

   • Store in a dry, cool place away from direct sunlight.
   • Follow ESD (Electrostatic Discharge) precautions during handling and transportation.

7. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use appropriate test equipment and methods to avoid damaging the device.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)