Details

---

BUY STP652F https://www.utsource.net/itm/p/12608507.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage Drop (at IF = 10A)	VF	-	1.8	2.2	V	TJ = 25掳C
Reverse Recovery Time (at IR = 1A, dI/dt = 100 A/渭s)	trr	-	75	120	ns	TJ = 25掳C
Maximum RMS Current (at f = 50 Hz)	IF(AV)	-	-	30	A	TC = 70掳C
Peak Repetitive Reverse Voltage	VRRM	-	-	600	V	TJ = 25掳C
Non-Repetitive Peak Forward Surge Current (8.3 ms single half sine-wave)	IFSM	-	-	400	A	TJ = 25掳C
Junction to Case Thermal Resistance	R胃JC	-	-	0.5	掳C/W	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Mount the device on a heatsink to ensure proper heat dissipation, especially during high current operations.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse biasing, which can lead to device failure.
   • Use appropriate wire gauges and connections to handle the rated currents without excessive resistance or heating.

3. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it remains within the specified limits.
   • Use thermal paste between the device and heatsink to improve thermal conductivity.

4. Surge Current Protection:

   • The device can handle peak forward surge currents up to 400A, but this should be a rare occurrence and not sustained.
   • Implement protective circuits to limit surge currents and prevent damage.

5. Reverse Voltage Protection:

   • Ensure that the reverse voltage does not exceed 600V to prevent breakdown and potential damage to the device.

6. Storage and Operating Temperatures:

   • Store the device in a dry environment within the temperature range of -55掳C to 150掳C.
   • Operate the device within the specified temperature range to ensure reliable performance.

7. Testing and Verification:

   • Before deploying the device in a final application, perform thorough testing under expected operating conditions to verify performance and reliability.

8. Compliance and Standards:

   • Ensure that the device complies with relevant safety and performance standards for your specific application.

(For reference only)