Details

---

BUY TIP35CW,TIP36CW https://www.utsource.net/itm/p/12608520.html

Parameter	TIP35CW (NPN)	TIP36CW (PNP)
Type	NPN Power Transistor	PNP Power Transistor
Collector-Emitter Voltage (Vce)	100 V	100 V
Emitter-Base Voltage (Veb)	5 V	5 V
Collector Current (Ic)	15 A	15 A
Power Dissipation (Ptot)	125 W	125 W
Storage Temperature Range (Tstg)	-65掳C to +150掳C	-65掳C to +150掳C
Operating Temperature Range (Toper)	-65掳C to +150掳C	-65掳C to +150掳C
Base-Emitter Saturation Voltage (Vbe(sat))	1.8 V (max) at Ic = 15 A, Ib = 1.5 A	1.8 V (max) at Ic = 15 A, Ib = 1.5 A
Collector-Emitter Saturation Voltage (Vce(sat))	1.2 V (max) at Ic = 15 A, Ib = 1.5 A	1.2 V (max) at Ic = 15 A, Ib = 1.5 A
Transition Frequency (ft)	2.5 MHz	2.5 MHz
Thermal Resistance (Rth(j-c))	1.57掳C/W	1.57掳C/W

Instructions for Use:

1. Heat Sinking:

   • Both TIP35CW and TIP36CW have a high power dissipation capability. Ensure that they are properly heat-sinked to prevent thermal runaway and damage.
   • Use a thermal compound between the transistor and the heat sink to improve heat transfer.

2. Biasing:

   • For TIP35CW (NPN), apply a positive base current relative to the emitter to turn the transistor on.
   • For TIP36CW (PNP), apply a negative base current relative to the emitter to turn the transistor on.
   • Use appropriate resistors to limit the base current and prevent excessive power dissipation in the base-emitter junction.

3. Voltage and Current Ratings:

   • Do not exceed the maximum collector-emitter voltage (Vce) of 100 V or the maximum collector current (Ic) of 15 A.
   • Ensure that the power dissipation does not exceed 125 W to avoid overheating.

4. Storage and Operating Temperatures:

   • Store the transistors in a dry environment within the temperature range of -65掳C to +150掳C.
   • Operate the transistors within the same temperature range to ensure reliable performance.

5. Mounting:

   • Mount the transistors securely to a heat sink using the appropriate mounting hardware.
   • Ensure that the mounting surface is flat and clean to maximize heat transfer.

6. Handling:

   • Handle the transistors with care to avoid mechanical damage.
   • Use anti-static precautions to prevent damage from electrostatic discharge (ESD).

By following these instructions, you can ensure the reliable operation and longevity of the TIP35CW and TIP36CW transistors in your circuits.

(For reference only)