Details

---

BUY SN75115 https://www.utsource.net/itm/p/12608541.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	Vcc		4.5		18	V
Output Current (Source)	Iout (source)	Per output, continuous		100		mA
Output Current (Sink)	Iout (sink)	Per output, continuous		100		mA
Input Voltage High	VIH		2.0		Vcc	V
Input Voltage Low	VIL		0		0.8	V
Propagation Delay Time	tpd	Typical, Vcc = 5V		35		ns
Power Dissipation	PD	Per package			650	mW
Operating Temperature	Toper	Storage	-40		85	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 18V.
   • Connect the Vcc pin to the power supply and GND to ground.

2. Input Signals:

   • Apply input signals to the appropriate input pins.
   • Ensure the input voltage levels are within the specified ranges:
     • High level (VIH): 2.0V to Vcc
     • Low level (VIL): 0V to 0.8V

3. Output Configuration:

   • The SN75115 can source or sink up to 100mA per output.
   • Connect the output pins to the load, ensuring the current does not exceed the maximum rating.

4. Propagation Delay:

   • The typical propagation delay time is 35ns at Vcc = 5V. This should be considered when designing timing-sensitive circuits.

5. Thermal Considerations:

   • The maximum power dissipation is 650mW. Ensure proper heat sinking if operating near this limit to prevent overheating.

6. Operating Temperature:

   • The device is rated to operate from -40掳C to 85掳C. Ensure the ambient temperature does not exceed these limits.

7. Storage:

   • Store the device in a dry, cool environment to prevent damage.

8. Handling:

   • Handle with care to avoid static discharge, which can damage the device. Use proper ESD protection practices.

9. Testing:

   • Before integrating the SN75115 into your design, test it in a simple circuit to ensure it meets the required specifications.

10. Compliance:

    • Ensure that the use of the SN75115 complies with all relevant safety and regulatory standards.

(For reference only)