Details

---

BUY 2SB601-AZ https://www.utsource.net/itm/p/12608566.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	800	V	IC = 0, TA = 25掳C
Emitter-Base Voltage	VEBO	-	-	7	V	IE = 0, TA = 25掳C
Base-Emitter Voltage	VBE	-	2.3	3.0	V	IC = 100 mA, TA = 25掳C
Collector Current	IC	-	-	15	A	VCE = 800 V, TA = 25掳C
Base Current	IB	-	-	1.5	A	VCE = 800 V, TA = 25掳C
Power Dissipation	PT	-	-	120	W	TC = 25掳C
Storage Temperature	TSTG	-55	-	150	掳C	-
Operating Temperature	TA	-55	-	150	掳C	-
Thermal Resistance	R胃JC	-	1.5	-	掳C/W	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical stress.
   • Use appropriate mounting techniques to ensure good thermal contact with the heat sink.

2. Electrical Connections:

   • Connect the collector, base, and emitter terminals correctly.
   • Ensure that the maximum ratings are not exceeded to prevent damage to the device.

3. Thermal Management:

   • The device should be mounted on a suitable heat sink to manage the power dissipation effectively.
   • Monitor the temperature to ensure it remains within the operating range.

4. Biasing:

   • Proper biasing of the base-emitter junction is crucial for optimal performance.
   • Use a current-limiting resistor for the base to prevent excessive base current.

5. Storage:

   • Store the device in a dry, cool place to avoid moisture and temperature-related damage.
   • Keep the device away from direct sunlight and sources of heat.

6. Testing:

   • Use a multimeter or other appropriate testing equipment to verify the device parameters before installation.
   • Follow safety guidelines to avoid electrical shock.

7. Safety:

   • Always disconnect the power supply when making connections or performing tests.
   • Use appropriate personal protective equipment (PPE) when handling high-voltage circuits.

(For reference only)