Details

---

BUY R1560P2 https://www.utsource.net/itm/p/12608576.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	4.5	-	5.5	V
Operating Current	Iop	-	20	30	mA
Peak Current	Ipk	-	50	70	mA
Wavelength	位	850	-	950	nm
Viewing Angle	胃v	10	20	30	掳
Forward Voltage	Vf	1.2	1.5	1.8	V
Reverse Voltage	Vr	-	-	5	V
Reverse Current	Ir	-	-	10	渭A
Storage Temperature	Tstg	-40	-	85	掳C
Operating Temperature	Topr	-25	-	85	掳C

Instructions for R1560P2

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Avoid exceeding the maximum operating current of 30mA to prevent damage.

2. Current Handling:

   • The typical operating current is 20mA, but it can handle up to 50mA peak current for short durations.
   • Do not exceed the peak current of 70mA to avoid overheating and potential failure.

3. Wavelength:

   • The emitted light wavelength is typically between 850nm and 950nm, suitable for infrared applications.

4. Viewing Angle:

   • The viewing angle ranges from 10掳 to 30掳, providing a moderate spread of light.

5. Forward Voltage:

   • The forward voltage (Vf) is typically around 1.5V, with a range of 1.2V to 1.8V. Ensure your circuit can provide this voltage.

6. Reverse Voltage:

   • The reverse voltage (Vr) should not exceed 5V to prevent damage to the component.

7. Reverse Current:

   • The reverse current (Ir) should be kept below 10渭A to avoid leakage and potential issues.

8. Temperature Considerations:

   • Store the component in temperatures ranging from -40掳C to 85掳C.
   • Operate the component within the temperature range of -25掳C to 85掳C to ensure reliable performance.

9. Handling and Storage:

   • Handle the component with care to avoid static discharge and physical damage.
   • Store in a dry, cool place to prevent moisture damage.

10. Mounting:

    • Follow the recommended soldering profile to ensure proper attachment to the PCB.
    • Ensure good thermal management if the component will be operated at high currents or in high-temperature environments.

(For reference only)