Details

---

BUY FA5623 https://www.utsource.net/itm/p/12608604.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Quiescent Current	Iq	-	100	-	渭A
Output Current	Io	-	1000	-	mA
Thermal Shutdown	TSD	-	150	-	掳C
Overcurrent Protection	OCP	-	1.2	-	A
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C

Instructions for Using FA5623

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Quiescent Current (Iq):

   • The quiescent current is typically 100 渭A. This value should be considered when designing power-efficient circuits.

3. Output Current (Io):

   • The device can provide up to 1000 mA of output current. Ensure that the load does not exceed this limit to prevent overheating or damage.

4. Thermal Shutdown (TSD):

   • The device will automatically shut down if the temperature exceeds 150掳C. This is a safety feature to protect the component from overheating.

5. Overcurrent Protection (OCP):

   • The device has built-in overcurrent protection that triggers at approximately 1.2 A. This helps prevent damage due to excessive current draw.

6. Operating Temperature (Topr):

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this range to maintain reliable performance.

7. Storage Temperature (Tstg):

   • The storage temperature range is from -55掳C to 150掳C. Store the device in a dry place within this temperature range to ensure its longevity.

8. Mounting:

   • Use appropriate mounting techniques to ensure good thermal dissipation. Consider using a heatsink if the device will be operating near its maximum output current.

9. Layout:

   • Follow good PCB layout practices to minimize noise and interference. Keep power and ground traces short and wide, and use decoupling capacitors close to the Vcc pin.

10. Testing:

    • Before deploying the device in a final application, test it under various conditions to ensure it meets the required specifications and performance criteria.

(For reference only)