Details

---

BUY AN217P https://www.utsource.net/itm/p/12608612.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Output Current	Iout	-	100	200	mA
Quiescent Current	Iq	0.1	0.5	1.0	mA
Dropout Voltage	Vdo	0.3	0.5	0.8	V
Thermal Shutdown	TSD	-	150	-	掳C
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Using AN217P

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V. Operating outside this range can damage the device.

2. Output Current (Iout):

   • The AN217P can provide up to 200mA of output current. For reliable operation, keep the load current below 200mA.

3. Quiescent Current (Iq):

   • The quiescent current is the current consumed by the regulator when no load is applied. It typically ranges from 0.1mA to 1.0mA.

4. Dropout Voltage (Vdo):

   • The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation. It typically ranges from 0.3V to 0.8V.

5. Thermal Shutdown (TSD):

   • The device has thermal protection that activates at approximately 150掳C. If the temperature exceeds this threshold, the device will shut down to prevent damage.

6. Operating Temperature (Topr):

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device operates within this range to avoid performance issues.

7. Storage Temperature (Tstg):

   • The storage temperature range is from -65掳C to 150掳C. Store the device within this range to prevent physical damage.

8. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress or damage to the leads.
   • Follow proper soldering techniques to ensure reliable connections and avoid overheating during assembly.

9. Capacitors:

   • Use appropriate input and output capacitors to stabilize the voltage and reduce ripple. Recommended values are typically 10渭F for both input and output.

10. Layout Considerations:

    • Place the input and output capacitors as close as possible to the device to minimize inductance and improve stability.
    • Ensure good thermal management by providing adequate heat sinking if the device is expected to dissipate significant power.

By following these guidelines, you can ensure optimal performance and reliability of the AN217P in your application.

(For reference only)