Details

---

BUY NJM311M https://www.utsource.net/itm/p/12608627.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	-	2.0	-	6.0	V
Quiescent Current	ICC	VCC = 5V, no load	-	1.5	-	mA
Output Voltage Swing	VOUT	VCC = 5V, RL = 600惟	0.3	-	4.7	V
Input Bias Current	IB	VCC = 5V	-	50	-	nA
Input Offset Voltage	VOS	VCC = 5V	-	2.0	-	mV
Slew Rate	SR	VCC = 5V	-	0.5	-	V/渭s
Common Mode Rejection Ratio	CMRR	VCC = 5V	-	80	-	dB
Power Supply Rejection Ratio	PSRR	VCC = 5V	-	80	-	dB
Operating Temperature Range	TA	-	-40	-	85	掳C

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 2.0V to 6.0V.
   • The typical operating voltage is 5V.

2. Quiescent Current (I_CC):

   • The quiescent current is typically 1.5mA at 5V with no load.

3. Output Voltage Swing (V_OUT):

   • The output voltage swing can range from 0.3V to 4.7V when the supply voltage is 5V and the load resistance is 600惟.

4. Input Bias Current (I_B):

   • The input bias current is typically 50nA at 5V.

5. Input Offset Voltage (V_OS):

   • The input offset voltage is typically 2.0mV at 5V.

6. Slew Rate (SR):

   • The slew rate is typically 0.5V/渭s at 5V.

7. Common Mode Rejection Ratio (CMRR):

   • The common mode rejection ratio is typically 80dB at 5V.

8. Power Supply Rejection Ratio (PSRR):

   • The power supply rejection ratio is typically 80dB at 5V.

9. Operating Temperature Range (T_A):

   • The device can operate within a temperature range of -40掳C to 85掳C.

Additional Notes:

• Ensure proper decoupling capacitors are used to stabilize the supply voltage.
• Avoid exceeding the maximum ratings to prevent damage to the device.
• For detailed application circuits and further information, refer to the datasheet provided by the manufacturer.

(For reference only)