Details

---

BUY A2C34654ATIC88B https://www.utsource.net/itm/p/12608629.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	A2C34654ATIC88B	-
Package Type	Physical Enclosure	TSSOP-16	-
Operating Voltage (Vcc)	Supply Voltage Range	2.7 to 5.5	V
Operating Temperature	Ambient Temperature Range	-40 to 85	掳C
Storage Temperature	Storage Temperature Range	-65 to 150	掳C
Input Current (Iin)	Maximum Input Current	10	mA
Output Current (Iout)	Maximum Output Current	50	mA
Quiescent Current (Iq)	Supply Current at No Load	1	渭A
Power Consumption	Maximum Power Dissipation	125	mW
Output Voltage (Vout)	Typical Output Voltage at Vcc = 5V	4.5	V
Output Voltage (Vout)	Typical Output Voltage at Vcc = 3.3V	3.0	V
Response Time	Time to Reach 90% of Final Output	10	渭s
Output Ripple	Peak-to-Peak Output Ripple	20	mV
PSRR (Power Supply Rejection Ratio)	Rejection of Input Voltage Changes	70	dB
ESD Rating	Human Body Model (HBM)	2000	V
Lead Finish	Surface Finish of Leads	Matte Tin	-
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes	-

Instructions for Use:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
   • Connect the Vcc pin to the positive terminal of the power supply.

2. Ground Connection:

   • Connect the GND pin to the common ground of the system.

3. Input and Output Connections:

   • Connect the input signal to the designated input pin.
   • Connect the output pin to the load or the next stage in the circuit.

4. Decoupling Capacitors:

   • Place a 0.1渭F ceramic capacitor close to the Vcc and GND pins to filter out high-frequency noise.
   • Optionally, add a 10渭F electrolytic capacitor in parallel for additional filtering.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation limit.
   • Consider using a heatsink if necessary.

6. Storage and Handling:

   • Store the component in a dry, cool place within the specified storage temperature range.
   • Handle with care to avoid damage from static electricity. Use proper ESD protection measures.

7. Testing:

   • Before integrating into the final design, test the component on a breadboard or evaluation board to ensure it meets the required specifications.

8. Compliance:

   • Verify that the component complies with all relevant safety and environmental regulations, such as RoHS.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)