Details

---

BUY C92M-02 https://www.utsource.net/itm/p/12608637.html

Parameter	Value	Unit
Type	Photocoupler	-
Forward Current	IF	50	mA
Forward Voltage	VF	1.2	V
Reverse Voltage	VR	7	V
Collector-Emitter Voltage	VCE	30	V
Collector Current	IC	50	mA
Isolation Voltage	VIORM	2500	Vrms
Operating Temperature	Topr	-40 to 85	掳C
Storage Temperature	Tstg	-40 to 85	掳C
Rise Time	tr	2	渭s
Fall Time	tf	2	渭s
CTR (Current Transfer Ratio)	CTR	50 to 600	%

Instructions:

1. Handling and Storage:

   • Store the device in a dry, cool place.
   • Handle with care to avoid damage to the leads and body.

2. Soldering:

   • Use a soldering iron with a temperature not exceeding 260掳C.
   • Soldering time should not exceed 10 seconds per lead.

3. Mounting:

   • Ensure proper alignment of the device during mounting.
   • Avoid applying excessive force to the leads.

4. Electrical Connections:

   • Connect the forward current (IF) and forward voltage (VF) as specified.
   • Ensure the collector-emitter voltage (VCE) does not exceed the maximum rating.
   • Keep the operating temperature within the specified range to avoid thermal damage.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use appropriate test equipment to measure the rise and fall times, as well as the current transfer ratio (CTR).

6. Safety:

   • Ensure the isolation voltage (VIORM) is not exceeded to prevent electrical shock or damage.
   • Follow all relevant safety guidelines when handling and testing the device.

(For reference only)