Details

---

BUY BTA16-800CW https://www.utsource.net/itm/p/12608638.html

Parameter	Symbol	Value	Unit
Rated RMS On-State Current	IT(RMS)	16	A
Peak On-State Current	ITSM	125	A
RMS Off-State Voltage	VDRM	800	V
Non-Repetitive Peak Off-State Voltage	VRRM	1200	V
On-State Voltage Drop	VT	1.3 (max)	V
Gate Trigger Current	IG(T)	50 (max)	mA
Holding Current	IH	30 (max)	mA
Thermal Resistance, Junction to Case	R胃JC	1.5	掳C/W
Operating Temperature Range	Tj	-40 to 125	掳C

Instructions for BTA16-800CW

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within the specified range.
   • Use thermal compound between the device and the heatsink to improve thermal conductivity.

2. Gate Drive:

   • Apply a gate trigger current (IG(T)) of at least 50 mA to ensure reliable turn-on.
   • The gate voltage should be between 4 V and 15 V for optimal performance.

3. Current Handling:

   • Do not exceed the rated RMS on-state current (IT(RMS)) of 16 A.
   • For peak currents, do not exceed 125 A for short durations.

4. Voltage Handling:

   • The device can handle an RMS off-state voltage (VDRM) of up to 800 V.
   • For non-repetitive peak off-state voltage, ensure it does not exceed 1200 V.

5. Temperature Management:

   • Operate the device within the temperature range of -40掳C to 125掳C.
   • Monitor the junction temperature to avoid overheating, which can lead to premature failure.

6. Storage and Handling:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the leads.

7. Safety Precautions:

   • Ensure proper insulation and isolation to avoid electrical hazards.
   • Follow all relevant safety standards and guidelines when designing circuits that use this component.

By adhering to these parameters and instructions, you can ensure the reliable operation and longevity of the BTA16-800CW triac.

(For reference only)