Details

---

BUY ESAC33M-02N https://www.utsource.net/itm/p/12608639.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	ESAC33M-02N	-
Type	Component Type	Surface Mount Aluminum Electrolytic Capacitor	-
Capacitance	Nominal Capacitance	3300	渭F
Voltage Rating	Maximum DC Working Voltage	25	VDC
Tolerance	Capacitance Tolerance	卤20%	-
Ripple Current	Maximum Ripple Current (100kHz, 85掳C)	1350	mA
Operating Temperature Range	Minimum to Maximum Operating Temperature	-55 to +105	掳C
Case Size	Physical Dimensions	10mm x 10mm x 10mm	mm
Terminal Type	Connection Type	SMD (Surface Mount Device)	-
Height Above PCB	Maximum Height Above PCB	5.3	mm
Weight	Component Weight	0.5	g
Insulation Resistance	Minimum Insulation Resistance (25掳C)	300	M惟
ESR (Equivalent Series Resistance)	Maximum ESR at 100kHz	25	m惟
Life Expectancy	Rated Life at 105掳C	2000	hours

Instructions for Use:

1. Mounting: Ensure the capacitor is mounted on a flat, clean PCB surface. Use appropriate soldering techniques to avoid overheating.
2. Polarity: This capacitor is polarized. Ensure the positive terminal is connected to the higher potential and the negative terminal to the lower potential.
3. Voltage Handling: Do not exceed the maximum DC working voltage of 25VDC to prevent damage or failure.
4. Temperature Considerations: Operate the capacitor within the temperature range of -55掳C to +105掳C to ensure reliable performance.
5. Ripple Current: The maximum ripple current should not exceed 1350mA at 100kHz and 85掳C to avoid excessive heating.
6. Storage: Store in a dry, cool place away from direct sunlight and extreme temperatures.
7. Handling: Handle with care to avoid mechanical stress or damage to the terminals and body.
8. Inspection: Before installation, inspect the capacitor for any physical damage or defects.
9. Soldering: Use a soldering iron with a temperature setting no higher than 260掳C and complete soldering within 10 seconds to avoid thermal damage.
10. Environmental Compliance: This component complies with RoHS and REACH regulations. Dispose of according to local environmental guidelines.

(For reference only)