Details

---

BUY 5LC2 https://www.utsource.net/itm/p/12608641.html

Parameter	Description	Value
Part Number	5LC2
Type	Capacitor
Capacitance	Nominal Capacitance	100 pF
Tolerance	Capacitance Tolerance	±5%
Voltage Rating	Maximum DC Voltage	50 V
Temperature Coefficient	Change in Capacitance with Temperature	NPO (0 ± 30 ppm/°C)
Operating Temperature Range	Temperature Range for Operation	-55°C to +125°C
Case Size	Physical Size	0805 (2.0 x 1.25 mm)
Termination	End Finish	Tin/Silver
Mounting Type	Mounting Method	Surface Mount
Lead Spacing	Distance Between Leads	2.0 mm
Insulation Resistance	Minimum Insulation Resistance at 25°C	1000 MΩ
Dissipation Factor	Loss Tangent at 1 MHz	≤ 0.1%

Instructions for Use

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical stress or damage.

2. Soldering:

   • Preheat the board to 100°C to 125°C.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be limited to 10 seconds per connection.

3. Mounting:

   • Ensure the capacitor is placed correctly on the PCB.
   • Apply gentle pressure to ensure good contact with the solder pads.
   • Avoid excessive bending or twisting of the leads during mounting.

4. Testing:

   • After soldering, check for proper electrical continuity and insulation resistance.
   • Ensure the capacitance value is within the specified tolerance range.

5. Operating Conditions:

   • Do not exceed the maximum voltage rating.
   • Operate within the specified temperature range to ensure reliable performance.
   • Avoid exposure to high humidity or corrosive environments.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible to minimize environmental impact.

(For reference only)