Details

---

BUY STP75NS04Z https://www.utsource.net/itm/p/12608643.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Drain-source on-state resistance at ID = 10A, VGS = 10V	RDS(on)	Tc = 25掳C	4.0		5.0	m惟
Gate charge	Qg	VDS = 25V, ID = 10A			23	nC
Input capacitance	Ciss	VDS = 15V, f = 1MHz		1900		pF
Output capacitance	Coss	VDS = 15V, f = 1MHz		480		pF
Reverse transfer capacitance	Crss	VDS = 15V, ID = 1mA		70		pF
Total gate charge	Qg(tot)	VDS = 25V, ID = 10A			26	nC
Threshold voltage	VGS(th)	ID = 1mA, IDS = 250渭A	1.0	1.5	2.5	V
Maximum drain current	ID	TC = 25掳C	-		75	A
Maximum drain-source voltage	VDS		-		400	V
Maximum gate-source voltage	VGS		-		卤20	V
Junction temperature	TJ		-55		150	掳C
Storage temperature range	TSTG		-55		150	掳C

Instructions for STP75NS04Z:

1. Mounting and Handling:

   • Handle the device with care to avoid damage to the pins.
   • Ensure proper heat sinking if operating at high currents or in high ambient temperatures.

2. Electrical Connections:

   • Connect the drain (D) to the high voltage side of the circuit.
   • Connect the source (S) to the low voltage side or ground.
   • Apply the gate (G) signal carefully to control the switching action.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Keep the junction temperature within the operational limits by providing adequate cooling.

4. Testing and Verification:

   • Verify the correct operation by measuring the threshold voltage and on-resistance.
   • Test the device under actual operating conditions to ensure it meets performance requirements.

5. Storage and Packaging:

   • Store in a dry, cool place away from direct sunlight.
   • Follow anti-static precautions to prevent damage to the sensitive components.

6. Safety Precautions:

   • Always disconnect power before handling the device.
   • Use appropriate personal protective equipment when working with high voltages.

For detailed application notes and more specific guidance, refer to the official STMicroelectronics documentation for the STP75NS04Z.

(For reference only)