Details

---

BUY BTS117TC https://www.utsource.net/itm/p/12608644.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Continuous Current	IC	-	5	6	A	Ta = 25掳C
Peak Current	ICpk	-	10	-	A	ton = 1 ms, Ta = 25掳C
Supply Voltage	VIN	4.5	-	30	V
Quiescent Current	IQ	-	0.1	1	mA	VIN = 12V, no load
ON-State Resistance	RDS(on)	-	0.05	0.1	惟	VGS = 5V, IC = 5A
Thermal Shutdown Temperature	TSD	-	150	-	掳C
Operating Temperature Range	TA	-40	-	125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_IN) is within the range of 4.5V to 30V.
   • Use a stable power source to avoid voltage fluctuations that could affect performance.

2. Current Handling:

   • The BTS117TC can handle a continuous current of up to 5A at 25掳C ambient temperature.
   • For peak currents, do not exceed 10A for durations shorter than 1ms to prevent overheating.

3. Thermal Management:

   • Monitor the operating temperature to ensure it does not exceed 125掳C.
   • If the device reaches the thermal shutdown temperature of 150掳C, it will automatically turn off to protect itself.

4. Quiescent Current:

   • The quiescent current is typically 0.1mA and should not exceed 1mA when the supply voltage is 12V and there is no load.

5. ON-State Resistance:

   • When the gate-source voltage (V_GS) is 5V and the continuous current (I_C) is 5A, the ON-state resistance (R_DS(on)) is typically 0.05惟 and should not exceed 0.1惟.

6. Mounting and Layout:

   • Ensure proper heat dissipation by mounting the BTS117TC on a heatsink if necessary.
   • Follow good PCB layout practices to minimize parasitic inductance and resistance.

7. Protection:

   • The device includes built-in thermal shutdown and overcurrent protection.
   • External protection circuits may be necessary depending on the application to ensure robust operation.

8. Storage:

   • Store the BTS117TC in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge which can damage the component.

9. Testing:

   • Before integrating the BTS117TC into your design, test it under controlled conditions to verify its performance and reliability.

10. Compliance:

    • Ensure that your application complies with relevant safety and regulatory standards.

(For reference only)