Details
BUY TL1453 https://www.utsource.net/itm/p/12608645.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | Operating | 4.5 | 5.0 | 5.5 | V |
| Output Current | Iout | Per Channel | - | 20 | - | mA |
| Input Voltage Range | Vin | Relative to GND | 0 | - | Vcc | V |
| Power Dissipation | Pd | Total | - | - | 150 | mW |
| Operating Temperature | Topr | - | -40 | - | 85 | 掳C |
| Storage Temperature | Tstg | - | -65 | - | 150 | 掳C |
| Quiescent Current | Iq | - | - | 0.1 | 1.0 | mA |
| Channel-to-Channel Isolation | Viso | - | - | - | 50 | V |
Instructions for Using TL1453:
Supply Voltage:
- Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V. The typical operating voltage is 5.0V.
Output Current:
- Each channel can source or sink up to 20mA of current. Do not exceed this limit to avoid damaging the device.
Input Voltage Range:
- The input voltage (Vin) should be between 0V and Vcc relative to ground. Inputs outside this range can cause damage to the device.
Power Dissipation:
- The total power dissipation should not exceed 150mW. This is important to prevent overheating and potential failure.
Operating Temperature:
- The device is designed to operate in temperatures ranging from -40掳C to 85掳C. Ensure that the ambient temperature stays within these limits.
Storage Temperature:
- When storing the device, ensure the temperature is between -65掳C and 150掳C to prevent degradation.
Quiescent Current:
- The quiescent current (Iq) is typically 0.1mA and can go up to 1.0mA. This is the current consumed by the device when no load is applied.
Channel-to-Channel Isolation:
- The device provides up to 50V of isolation between channels, ensuring that signals on one channel do not interfere with others.
Additional Notes:
- Always refer to the datasheet for the most accurate and detailed information.
- Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.
- Ensure proper heat sinking if the device is expected to operate at high power levels or in high-temperature environments.
View more about TL1453 on main site
