Details

---

BUY G3MC-202P-12VDC https://www.utsource.net/itm/p/12608652.html

Parameter	Value
Model	G3MC-202P-12VDC
Type	Relay
Supply Voltage	12V DC
Coil Power	0.54W (at 12V)
Coil Resistance	260惟 (at 25掳C)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	5A at 250V AC / 30V DC
Contact Resistance	100m惟 max
Insulation Resistance	100M惟 min (at 500V DC)
Dielectric Strength	1000V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Humidity	95% RH max (non-condensing)
Life Expectancy	10 million operations
Weight	10g
Dimensions	17.3mm x 12.5mm x 10.3mm

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat surface.
   • Use the provided mounting holes or clips for secure installation.

2. Wiring:

   • Connect the supply voltage (12V DC) to the coil terminals.
   • Connect the load to the normally open (NO) and common (COM) contacts for switching on.
   • Connect the load to the normally closed (NC) and common (COM) contacts for switching off.

3. Operation:

   • When the coil is energized, the common contact switches from the NC position to the NO position.
   • When the coil is de-energized, the common contact returns to the NC position.

4. Safety:

   • Do not exceed the rated voltage and current for the coil and contacts.
   • Ensure proper insulation and isolation to avoid electrical hazards.
   • Avoid operating the relay in environments with excessive dust, moisture, or corrosive gases.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.
   • Replace the relay if it fails to operate correctly or shows signs of damage.

(For reference only)