Details

---

BUY AD5962-8853801PA https://www.utsource.net/itm/p/12608655.html

Parameter	Description	Value/Range	Unit
Device Type	High-Speed ADC	AD5962-8853801PA
Resolution	Bit resolution of the ADC	14 bits	bits
Sampling Rate	Maximum sampling rate	80 MSPS	MSPS
Input Type	Analog input type	Differential
Power Supply Voltage	Operating voltage range	1.8 V to 3.3 V	V
Interface	Digital output interface type	SPI
SNR (Signal-to-Noise Ratio)	Signal-to-noise ratio at a specified frequency and sample rate	72 dB typical	dB
SFDR (Spurious-Free Dynamic Range)	Spurious-free dynamic range at a specified frequency and sample rate	90 dB typical	dB
Package Type	Physical package of the device	TSSOP
Operating Temperature	Temperature range for reliable operation	-40掳C to +85掳C	掳C

Instructions:

1. Power Supply Connection: Ensure that the power supply voltage is within the specified range of 1.8 V to 3.3 V. Connect the power supply to the designated pins on the device.

2. Analog Input Configuration: Configure the analog inputs as differential. Ensure that the input signal does not exceed the maximum input voltage rating.

3. Digital Interface Setup: Use the SPI interface for communication. Set up the SPI clock and data lines according to the protocol specifications provided in the datasheet.

4. Sampling Rate Configuration: Set the desired sampling rate, ensuring it does not exceed the maximum of 80 MSPS. Adjust the clock settings accordingly.

5. Calibration: Perform any necessary calibration procedures as outlined in the datasheet to ensure accurate conversion results.

6. Temperature Considerations: Operate the device within the temperature range of -40掳C to +85掳C to maintain performance specifications.

7. Layout Guidelines: Follow recommended PCB layout guidelines to minimize noise and interference, particularly with respect to the analog and digital sections of the circuit.

8. Evaluation and Testing: Before deploying in a final application, evaluate the device using an evaluation board or similar setup to confirm it meets the required performance criteria.

(For reference only)