Details
BUY JH-228B https://www.utsource.net/itm/p/12608679.html
| Parameter | Description |
|---|---|
| Part Number | JH-228B |
| Type | Electronic Component |
| Package | DIP-8 |
| Operating Temp | -40掳C to +85掳C |
| Storage Temp | -65掳C to +150掳C |
| Supply Voltage | 3.3V to 5.5V |
| Current Draw | 1mA (Typical) |
| Output Type | Open Drain |
| Input Type | Digital |
| Frequency Range | 1Hz to 1MHz |
| Mounting Type | Through Hole |
Instructions for Use:
- Power Supply Connection: Connect the supply voltage (Vcc) between 3.3V and 5.5V to pin Vcc and ground (GND) to pin GND.
- Input Signal: Apply the digital input signal to the designated input pin. Ensure the signal levels are compatible with the supply voltage.
- Output Handling: The output is open drain, so connect a pull-up resistor between the output pin and Vcc if needed.
- Operating Temperature: Ensure that the operating temperature remains within -40掳C to +85掳C for optimal performance.
- Storage Conditions: Store in a dry place with temperatures not exceeding +150掳C and not falling below -65掳C.
- Frequency Settings: Configure the frequency settings within the range of 1Hz to 1MHz as required by your application.
- Mounting: This component uses through-hole technology; ensure proper soldering techniques are used during installation.
View more about JH-228B on main site