Details

---

BUY HF7520-009-HTP https://www.utsource.net/itm/p/12608689.html

Parameter	Value
Part Number	HF7520-009-HTP
Type	High-Frequency Transformer
Frequency Range	20 kHz to 1 MHz
Primary Inductance	200 渭H 卤 10%
Secondary Inductance	10 渭H 卤 10%
Turns Ratio	1:20
Isolation Voltage	3 kV RMS (1 minute)
Operating Temperature	-40掳C to +85掳C
Dimensions	30 mm x 20 mm x 15 mm
Weight	10 g
Mounting Style	Surface Mount (SMD)
Material	Ferrite Core

Instructions for Use

1. Handling and Storage:

   • Store in a dry, cool environment.
   • Avoid exposure to extreme temperatures and humidity.
   • Handle with care to prevent damage to the ferrite core and windings.

2. Installation:

   • Ensure proper orientation during installation.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Allow the transformer to cool naturally after soldering.

3. Electrical Connection:

   • Connect the primary side to the input power source.
   • Connect the secondary side to the load or circuit requiring the transformed voltage.
   • Verify the turns ratio and inductance values before connecting to ensure compatibility with your application.

4. Testing:

   • Test the transformer using a suitable high-frequency signal generator.
   • Measure the primary and secondary inductances to confirm they meet the specified values.
   • Check the isolation voltage by applying a 3 kV RMS test voltage for 1 minute between the primary and secondary windings.

5. Safety:

   • Always use appropriate safety equipment when handling high voltages.
   • Ensure that the transformer is properly insulated and grounded to prevent electrical shock.

6. Maintenance:

   • Inspect the transformer periodically for signs of physical damage or wear.
   • Replace the transformer if any issues are detected to avoid potential failures.

7. Disposal:

   • Dispose of the transformer according to local regulations for electronic waste.

(For reference only)