Details

---

BUY HEF4060BT,653 https://www.utsource.net/itm/p/12608691.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VDD	-	3	-	15	V
Supply Current (Quiescent)	IDDQ	VDD = 5V, f = 0 Hz	-	0.5	-	渭A
Input Low Voltage	VIL	VDD = 5V	-	1.5	-	V
Input High Voltage	VIH	VDD = 5V	-	3.5	-	V
Output Low Voltage	VOL	IOL = 0.4 mA, VDD = 5V	-	0.1	-	V
Output High Voltage	VOH	IOH = -0.4 mA, VDD = 5V	-	4.5	-	V
Propagation Delay Time	tpd	VDD = 5V, f = 1 MHz	-	45	-	ns
Power Dissipation	PD	-	-	-	250	mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 3V to 15V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • Apply input signals that are within the valid logic levels:
     • Low: 0V to 1.5V
     • High: 3.5V to V_DD

3. Output Signals:

   • The output will be:
     • Low: 0V to 0.1V
     • High: 4.5V to V_DD
   • Ensure the load current does not exceed the maximum ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 45 ns at V_DD = 5V and f = 1 MHz.

5. Power Dissipation:

   • Do not exceed the maximum power dissipation of 250 mW to avoid overheating and potential damage to the device.

6. Handling:

   • Handle the device with care to avoid static discharge which can damage the internal circuits.
   • Use appropriate ESD protection measures when handling or soldering the device.

7. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.

8. Testing:

   • Before integrating the device into a circuit, test it in a controlled environment to ensure it meets the specified parameters.

9. Layout Considerations:

   • Use short leads and proper decoupling capacitors (e.g., 0.1 渭F ceramic capacitor) close to the V_DD and GND pins to minimize noise and improve stability.

10. Compliance:

    • Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)