Details

---

BUY T106M1 https://www.utsource.net/itm/p/12608721.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	V_IN	2.7	-	5.5	V
Output Voltage	V_OUT	-	3.3	-	V	Fixed
Output Current	I_OUT	-	1	1.5	A
Quiescent Current	I_Q	-	20	40	渭A
Efficiency	畏	-	90	-	%	@ 1A
Operating Temp	T_OP	-40	-	85	掳C
Storage Temp	T_STG	-55	-	125	掳C
Package	-	-	SOT-23	-	-

Instructions for Using T106M1

1. Input Connection:

   • Connect the input voltage (V_IN) to the VIN pin. Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Connection:

   • Connect the output load to the VOUT pin. The T106M1 provides a fixed output voltage of 3.3V.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of your circuit.

4. Capacitors:

   • Place a 1渭F ceramic capacitor between VIN and GND as close as possible to the device.
   • Place a 1渭F ceramic capacitor between VOUT and GND as close as possible to the device.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high output currents. The device can handle up to 1.5A, but efficiency and temperature should be monitored.

6. Operating Temperature:

   • The device operates reliably within the temperature range of -40掳C to 85掳C. Store the device in the range of -55掳C to 125掳C.

7. Package:

   • The T106M1 comes in a SOT-23 package. Follow standard surface mount soldering procedures for installation.

8. Testing:

   • Before final assembly, test the device with a known load to ensure it meets the specified output voltage and current requirements.

9. Safety:

   • Do not exceed the maximum ratings to avoid damage to the device. Always follow good electrical engineering practices when handling and testing the device.

(For reference only)