Details

---

BUY IXFR140N20P https://www.utsource.net/itm/p/12608730.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCE	-	-	200	V
Collector-Base Voltage	VCB	-	-	200	V
Emitter-Base Voltage	VEB	-2	-	5	V
Continuous Collector Current	IC	-	140	-	A
Pulse Collector Current (t = 10 ms)	IC(m)	-	280	-	A
Power Dissipation	PTOT	-	-	250	W
Junction Temperature	TJ	-55	-	175	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	RthJC	-	0.45	-	K/W

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical stress.
   • Mount the device on a suitable heatsink to ensure proper thermal management.

2. Electrical Connections:

   • Connect the collector, emitter, and base terminals correctly to avoid damage.
   • Use appropriate wire gauges to handle the current ratings.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure the junction temperature remains within the specified range to prevent thermal damage.

4. Storage:

   • Store the device in a dry environment within the specified storage temperature range.
   • Avoid exposure to high humidity and corrosive environments.

5. Testing:

   • Perform initial testing at low power levels to verify correct operation.
   • Gradually increase power levels while monitoring temperature and performance.

6. Safety Precautions:

   • Use appropriate safety equipment when handling high voltage and current circuits.
   • Follow all relevant safety standards and guidelines.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections and power supply.
   • Verify that the device is not overheating and that the heatsink is functioning properly.

8. Disposal:

   • Dispose of the device according to local environmental regulations.
   • Recycle electronic components where possible.

(For reference only)