Details

---

BUY MSM6242 https://www.utsource.net/itm/p/12608731.html

Parameter	Description	Symbol	Min	Typ	Max	Unit
Supply Voltage	Operating voltage range	Vcc	2.0	-	5.5	V
Current Consumption	Active mode current	ICC1	-	1.8	-	mA
Current Consumption	Standby mode current	ICC2	-	0.2	-	μA
Output High Level Voltage	High-level output voltage	VOH	-	-	Vcc-0.3	V
Output Low Level Voltage	Low-level output voltage	VOL	0.3	-	-	V
Operating Temperature Range	Temperature range for operation	Ta	-40	-	85	°C
Storage Temperature Range	Temperature range for storage	Tstg	-55	-	125	°C
Frequency Accuracy	Maximum deviation from nominal frequency	±f	-	-	±20	ppm/°C
Frequency Stability	Stability over temperature and time	Δf/f	-	-	±50	ppm

Instructions for Using the MSM6242 Real-Time Clock (RTC)

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.0V to 5.5V.
   • The device can operate with a wide range of voltages, but it is recommended to use a stable power source.

2. Current Consumption:

   • In active mode, the current consumption (ICC1) is typically 1.8mA.
   • In standby mode, the current consumption (ICC2) is typically 0.2μA, making it suitable for battery-powered applications.

3. Output Levels:

   • The high-level output voltage (VOH) should be at least Vcc - 0.3V.
   • The low-level output voltage (VOL) should not exceed 0.3V.

4. Temperature Considerations:

   • The operating temperature range (Ta) is from -40°C to 85°C.
   • The storage temperature range (Tstg) is from -55°C to 125°C.

5. Frequency Accuracy and Stability:

   • The frequency accuracy (±f) is ±20 ppm/°C, indicating the maximum deviation from the nominal frequency due to temperature changes.
   • The frequency stability (Δf/f) is ±50 ppm, ensuring reliable operation over time and temperature variations.

6. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and functions.
   • Ensure proper connections for Vcc, GND, and any control or data pins as required by your application.

7. Programming and Operation:

   • Use the appropriate commands to set and read the time and date.
   • Consult the datasheet for detailed programming instructions and timing diagrams.

8. Backup Battery:

   • For continuous operation during power loss, connect a backup battery to the Vbat pin.
   • Ensure the backup battery voltage is within the specified range and compatible with the device.

9. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

10. Testing and Validation:

    • After installation, verify the RTC operation by setting and reading the time and date.
    • Perform periodic checks to ensure the device is functioning correctly.

For more detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)