Details

---

BUY L165 https://www.utsource.net/itm/p/12608760.html

Parameter	Description	Value
Device Type	High-Side Switch	-
Package	SOIC-8, DIP-8	-
Input Voltage	Operating Range (VIN)	4.5 V to 28 V
Load Current	Maximum Continuous Load Current (IL)	3 A
Thermal Shutdown	Thermal Protection	Yes
Short-Circuit Protection	Output Short-Circuit Protection	Yes
Operating Temperature	Junction Temperature (TJ)	-40掳C to 150掳C
Storage Temperature	Storage Temperature (TSTG)	-65掳C to 150掳C
Output Voltage Drop	Saturation Voltage (VCE(sat))	1.2 V (max)
Control Input	Logic Input Voltage (VIL, VIH)	0.8 V to 3.5 V
Quiescent Current	Supply Current (IQ)	10 mA (typical)

Instructions for Use

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the V_IN pin.
   • Connect the ground (GND) to the common ground of the system.

2. Load Connection:

   • Connect the load between the OUT pin and the ground (GND).

3. Control Input:

   • Apply a logic high (V_IH) to the IN pin to turn on the switch.
   • Apply a logic low (V_IL) to the IN pin to turn off the switch.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high load currents or in high ambient temperatures.
   • Use a heatsink if necessary to keep the junction temperature within the specified range.

5. Protection Features:

   • The device includes thermal shutdown and short-circuit protection to prevent damage under fault conditions.
   • After a thermal shutdown, the device will automatically reset once it cools down.

6. Storage and Handling:

   • Store the device in a dry environment within the specified storage temperature range.
   • Handle with care to avoid damage to the pins and package.

7. Testing and Troubleshooting:

   • Verify the input voltage and control signals using a multimeter.
   • Check for proper grounding and correct polarity connections.
   • If the device does not function as expected, ensure that the load is within the rated current and voltage limits.

(For reference only)