Details

---

BUY HE1AN-W-DC12V-Y6 https://www.utsource.net/itm/p/12608765.html

Parameter	Description
Model Number	HE1AN-W-DC12V-Y6
Type	Electromagnetic Relay
Voltage	DC 12V
Coil Resistance	1000 惟 卤 10%
Pick-up Voltage	8.4V (min)
Drop-out Voltage	1.2V (max)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A @ 250VAC, 10A @ 30VDC
Insulation Voltage	1000VAC (min) for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Humidity	95% RH (non-condensing)
Dimensions	17.5mm x 12.5mm x 10.5mm
Weight	6g

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Use appropriate wiring and connectors to connect the relay to the power source and load.

2. Power Supply:

   • Connect the coil terminals to a DC 12V power supply.
   • Ensure the voltage does not exceed the specified range to avoid damage to the relay.

3. Operation:

   • When the coil is energized, the normally open (NO) contact will close, and the normally closed (NC) contact will open.
   • When the coil is de-energized, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.

5. Safety:

   • Do not exceed the maximum current ratings for the contacts.
   • Ensure proper grounding to prevent electrical shock.
   • Avoid operating the relay in environments with high humidity or corrosive gases.

6. Disposal:

   • Dispose of the relay according to local regulations for electronic waste.

(For reference only)