Details

---

BUY LM258DR TI SOP8 https://www.utsource.net/itm/p/12608776.html

Parameter	Min	Typical	Max	Unit
Input Voltage Range	2.5	-	40	V
Output Voltage Range	-	-	40	V
Supply Current	-	1.6	3.6	mA
Quiescent Current	-	350	800	渭A
Slew Rate	-	0.5	-	V/渭s
Common-Mode Rejection	-	90	-	dB
Power-Supply Rejection	-	80	-	dB
Operating Temperature	-40	-	85	掳C

Instructions for LM258DR TI SOP8

1. Power Supply Connection:

   • Connect the positive supply voltage to pin 8 (Vcc) and the negative supply voltage or ground to pin 4 (GND).

2. Input Signal:

   • Apply the input signal to the non-inverting (pin 3) or inverting (pin 2) inputs as required by your circuit design.

3. Output Configuration:

   • The output is taken from pin 1. Ensure proper load resistance is connected to avoid damage or performance issues.

4. Decoupling Capacitors:

   • Place a 0.1 渭F ceramic capacitor between Vcc and GND close to the device to minimize noise and transient effects.

5. Operating Temperature:

   • Ensure that the operating temperature remains within the specified range (-40掳C to +85掳C) to maintain reliable operation.

6. Handling Precautions:

   • The LM258DR is sensitive to electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

7. Mounting:

   • Follow standard surface-mount technology (SMT) procedures for mounting the SOP8 package on the PCB. Ensure proper soldering and alignment to prevent short circuits or poor connections.

8. Testing:

   • After assembly, test the device under typical operating conditions to ensure it meets the expected performance parameters.

(For reference only)