Details

---

BUY TLV2217-25 https://www.utsource.net/itm/p/12608780.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	2.7	-	5.5	V	-
Quiescent Current	IQ	-	400	-	渭A	Per amplifier
Input Offset Voltage	VIO	-	3	-	mV	-
Input Bias Current	IB	-	1	-	nA	-
Input Voltage Range	VIN	VCC - 1.8	-	VCC - 0.1	V	-
Output Voltage Swing	VOUT	0.01	-	VCC - 0.01	V	-
Slew Rate	SR	-	0.6	-	V/渭s	-
Bandwidth (Unity Gain)	fT	-	1.5	-	MHz	-
Large Signal Voltage Gain	AV	-	100	-	dB	-
Common Mode Rejection Ratio	CMRR	-	80	-	dB	-
Power Supply Rejection Ratio	PSRR	-	80	-	dB	-

Instructions for Use:

1. Supply Voltage:

   • The TLV2217-25 operates with a supply voltage range from 2.7V to 5.5V. Ensure that the power supply is within this range to avoid damage to the device.

2. Quiescent Current:

   • The quiescent current per amplifier is typically 400 渭A. This should be considered when designing circuits with power constraints.

3. Input Offset Voltage:

   • The input offset voltage is typically 3 mV. This can affect precision applications, so it may need to be compensated for in the circuit design.

4. Input Bias Current:

   • The input bias current is typically 1 nA. This is important for high-impedance sources to minimize errors.

5. Input Voltage Range:

   • The input voltage range is from V_CC - 1.8V to V_CC - 0.1V. Inputs outside this range can cause the amplifier to operate incorrectly or be damaged.

6. Output Voltage Swing:

   • The output voltage swing is from 0.01V to V_CC - 0.01V. This ensures that the output can drive loads effectively without clipping.

7. Slew Rate:

   • The slew rate is typically 0.6 V/渭s. This limits the maximum rate of change of the output voltage and affects the ability to amplify fast signals.

8. Bandwidth (Unity Gain):

   • The unity gain bandwidth is typically 1.5 MHz. This is the frequency at which the gain drops to 0 dB.

9. Large Signal Voltage Gain:

   • The large signal voltage gain is typically 100 dB. This indicates the amplification capability of the device for large signals.

10. Common Mode Rejection Ratio (CMRR):

    • The CMRR is typically 80 dB. This measures the ability of the amplifier to reject common-mode signals, which is crucial for differential inputs.

11. Power Supply Rejection Ratio (PSRR):

    • The PSRR is typically 80 dB. This measures the ability of the amplifier to reject variations in the power supply voltage.

Additional Notes:

• Always ensure proper decoupling capacitors are used near the power supply pins to filter out noise.
• For optimal performance, use the device within its specified operating conditions.
• Refer to the datasheet for more detailed information and specific application notes.

(For reference only)