Details
BUY MC14066BG https://www.utsource.net/itm/p/12608786.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 4.5 | 5.0 | 5.5 | V |
| Operating Temperature Range | TA | - | -40 | - | 85 | 掳C |
| Storage Temperature Range | TSTG | - | -65 | - | 150 | 掳C |
| Input Low Voltage | VIL | VCC = 5V | 0.8 | - | - | V |
| Input High Voltage | VIH | VCC = 5V | - | - | 2.0 | V |
| Output Low Voltage | VOL | IOL = 16mA, VCC = 5V | 0.4 | - | - | V |
| Output High Voltage | VOH | IOH = -0.4mA, VCC = 5V | - | - | 2.4 | V |
| Propagation Delay Time | tpd | VCC = 5V, TA = 25掳C | - | 20 | - | ns |
| Power Dissipation | PD | - | - | - | 330 | mW |
Instructions for Using MC14066BG:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 4.5V to 5.5V.
- Connect the ground (GND) pin to a stable reference point.
Temperature Considerations:
- The operating temperature range is from -40掳C to 85掳C.
- The storage temperature range is from -65掳C to 150掳C.
Input Levels:
- For a logic low input, ensure the voltage is below 0.8V.
- For a logic high input, ensure the voltage is above 2.0V.
Output Levels:
- When the output is low, the voltage should not exceed 0.4V.
- When the output is high, the voltage should be at least 2.4V.
Propagation Delay:
- The typical propagation delay time is 20ns under standard conditions (VCC = 5V, TA = 25掳C).
Power Dissipation:
- The maximum power dissipation is 330mW. Ensure adequate heat dissipation if operating near this limit.
Handling:
- Handle the device with care to avoid static damage.
- Follow ESD (Electrostatic Discharge) precautions when handling the IC.
Mounting:
- Ensure proper mounting on the PCB to maintain good thermal and electrical performance.
- Use appropriate soldering techniques to avoid overheating the device during assembly.
Testing:
- Verify the functionality of the IC using a known good test setup before integrating it into a larger system.
- Check for correct power supply and signal levels during testing.
Storage:
- Store the device in a dry, cool place away from direct sunlight and sources of heat.
View more about MC14066BG on main site
