Details

---

BUY 6R125P. https://www.utsource.net/itm/p/12608801.html

Parameter	Description	Value
Part Number	Full part number	6R125P
Type	Resistor
Resistance	Nominal resistance value	6.125 惟
Tolerance	Tolerance of resistance	卤5%
Power Rating	Maximum power dissipation	0.25 W
Operating Temp	Temperature range for operation	-55掳C to +125掳C
Case Size	Physical size of the resistor	0805
Material	Resistor body material	Carbon Film
Termination	Type of termination	SMD (Surface Mount Device)
Compliance	Standards compliance	RoHS, REACH

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid touching the resistor body directly to prevent contamination.

2. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a soldering iron with a temperature of 350掳C to 400掳C.
   • Soldering time should not exceed 3 seconds per terminal.
   • Allow the solder joints to cool naturally without disturbance.

3. Mounting:

   • Ensure the resistor is placed correctly on the PCB according to the design layout.
   • Use appropriate flux for better soldering results.
   • Inspect solder joints for quality and ensure no shorts or bridges.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from static and environmental factors.

5. Testing:

   • Use a multimeter to verify the resistance value before installation.
   • Test the final assembly to ensure proper functionality and resistance within tolerance.

6. Disposal:

   • Dispose of any defective or unused components in accordance with local environmental regulations.

(For reference only)