Details

---

BUY NDP6020P https://www.utsource.net/itm/p/12608803.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	4.5	-	5.5	V
Output Current	Iout	-	2.0	3.0	A	Continuous
Peak Output Current	Ioutp	-	4.0	5.0	A	Pulse
Quiescent Current	Iq	-	1.0	2.0	mA
Efficiency	畏	85	90	95	%	At 2A
Dropout Voltage	Vdo	-	0.2	0.5	V	At 2A
Operating Temperature	Topr	-40	-	125	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Thermal Shutdown	TSD	-	160	-	掳C
Short-Circuit Current	Isc	-	5.0	-	A

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Output Current:

   • The device can provide a continuous output current of up to 3.0A.
   • For pulse applications, the peak output current can reach up to 5.0A.

3. Quiescent Current:

   • The quiescent current (Iq) is typically 1.0mA, which helps in minimizing power consumption during idle states.

4. Efficiency:

   • The efficiency of the NDP6020P is typically 90%, with a range from 85% to 95% at 2A output current.

5. Dropout Voltage:

   • The dropout voltage (Vdo) is typically 0.2V and can go up to 0.5V at 2A output current.

6. Temperature Considerations:

   • The operating temperature range is from -40掳C to 125掳C.
   • The storage temperature range is from -65掳C to 150掳C.
   • The thermal shutdown (TSD) occurs at approximately 160掳C to protect the device from overheating.

7. Short-Circuit Protection:

   • The device has built-in short-circuit protection, limiting the current to approximately 5.0A to prevent damage.

8. Layout and PCB Design:

   • Use a good thermal design to ensure efficient heat dissipation.
   • Place the device close to the load to minimize trace resistance and inductance.

9. Capacitors:

   • Use appropriate input and output capacitors to stabilize the power supply and reduce ripple.
   • Recommended values are typically 10渭F for input and 10渭F for output.

10. Inductor Selection:

    • Choose an inductor with low DC resistance and suitable inductance value to match the application requirements.

11. Safety Precautions:

    • Always follow proper handling and installation procedures to avoid damage to the device.
    • Ensure all connections are secure and correct to prevent short circuits or other electrical issues.

(For reference only)