Details

---

BUY NJM1496V https://www.utsource.net/itm/p/12608808.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		-10		+30	V
Output Current (Short-Circuit)	Iout	Vo = 0V, T = 25掳C		卤30		mA
Input Offset Voltage	Vio	T = 25掳C		2.0	6.0	mV
Input Bias Current	Ib	T = 25掳C		80	400	nA
Input Offset Current	Ios	T = 25掳C		20	150	nA
Large Signal Voltage Gain	Av	RL = 2k惟, f = 1kHz	70	120	150	dB
Slew Rate	SR	RL = 2k惟, Vpp = 2V		0.5	1.0	V/渭s
Common Mode Rejection Ratio	CMRR	f = 60Hz	70	90	110	dB
Power Supply Rejection Ratio	PSRR	f = 60Hz	70	90	110	dB
Operating Temperature	Topr		-40		+85	掳C

Instructions for NJM1496V

1. Power Supply Connection:

   • Connect the power supply to the Vcc and GND pins ensuring that the voltage is within the specified range of -10V to +30V.

2. Input and Output Connections:

   • Connect the input signal to the non-inverting (+) and inverting (-) input terminals.
   • Ensure the output load resistance (RL) does not exceed the recommended values to maintain performance specifications.

3. Biasing and Stability:

   • For optimal performance, use appropriate biasing networks and ensure stability by placing capacitors close to the power supply pins if necessary.

4. Operating Temperature:

   • Operate the device within the temperature range of -40掳C to +85掳C to avoid damage and ensure reliable operation.

5. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD) which can damage sensitive components.
   • Avoid exceeding the maximum ratings listed in the parameter table to prevent damage to the device.

6. Testing:

   • When testing the device, use the typical conditions provided in the parameter table to get accurate results. Adjust parameters as needed based on specific application requirements.

(For reference only)