Details

---

BUY IR2106STRPBF https://www.utsource.net/itm/p/12608815.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	10	-	60	V
Under Voltage Lockout	UVLO	8.5	-	10	V
High-Side Driver Voltage	VHB	9.5	-	20	V
Low-Side Driver Voltage	VLB	0	-	5.5	V
High-Side Current Limit	IHB	-	1	-	A
Low-Side Current Limit	ILB	-	1	-	A
Propagation Delay Time	tPHL	40	-	70	ns
Propagation Delay Time	tPLH	40	-	70	ns
Matched Propagation Delay	tMD	-	30	-	ns
Input Capacitance	Ciss	-	15	-	pF
Operating Junction Temperature	TJ	-40	-	150	掳C

Instructions for IR2106STRPBF

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 10V to 60V to avoid damage or improper operation.

2. Under Voltage Lockout (UVLO):

   • The device will not operate if the supply voltage falls below 8.5V. It will resume operation when the voltage rises above 10V.

3. Driver Voltages:

   • Set the high-side driver voltage (VHB) between 9.5V and 20V.
   • Set the low-side driver voltage (VLB) between 0V and 5.5V.

4. Current Limits:

   • Monitor the current through the high-side (IHB) and low-side (ILB) drivers, ensuring it does not exceed 1A.

5. Propagation Delay:

   • Account for propagation delays (tPHL, tPLH) in your design, which can vary from 40ns to 70ns.
   • Note that matched propagation delay (tMD) is typically around 30ns.

6. Input Capacitance:

   • Consider the input capacitance (Ciss) of 15pF when designing circuits to ensure stability.

7. Operating Temperature:

   • Operate the device within a junction temperature range of -40掳C to 150掳C to ensure reliable performance.

8. Handling and Installation:

   • Follow proper handling procedures to prevent electrostatic discharge (ESD) damage.
   • Ensure correct orientation during installation to prevent shorts and misconnections.

(For reference only)