Details

---

BUY G2RL-2-24VDC https://www.utsource.net/itm/p/12608817.html

Parameter	Description
Model Number	G2RL-2-24VDC
Type	Relay
Voltage	24V DC
Coil Power Consumption	1.5W (max)
Coil Resistance	1600惟 (nominal)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A, 250V AC / 30V DC
Insulation Resistance	100M惟 (min) at 500V DC
Dielectric Strength	1000V AC for 1 minute
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Relative Humidity	5% to 95% (non-condensing)
Vibration Resistance	10 to 55Hz, 2G (peak)
Shock Resistance	50G (half-sine wave, 11ms duration)
Weight	25g (approx.)
Dimensions	17.5mm x 12.5mm x 25mm

Instructions

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use the provided mounting holes to secure the relay.
   • Avoid placing the relay near sources of high heat or moisture.

2. Wiring:

   • Connect the coil terminals to the 24V DC power supply.
   • Connect the common (COM) terminal to the circuit you want to control.
   • Connect the normally open (NO) and normally closed (NC) terminals as required by your application.

3. Operation:

   • When the 24V DC is applied to the coil, the relay will energize, and the contacts will switch from NC to NO.
   • When the power is removed, the relay will de-energize, and the contacts will return to their default NC position.

4. Testing:

   • Use a multimeter to verify the continuity between the COM and NO/NC terminals before and after applying power to the coil.
   • Ensure the relay operates smoothly without any unusual noise or vibration.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.
   • Do not use solvents or abrasive materials that could damage the relay.

6. Safety:

   • Always disconnect the power supply before performing any maintenance or testing.
   • Ensure the relay is used within its specified voltage and current ratings to avoid damage or failure.
   • Follow all local electrical codes and regulations when installing and using the relay.

(For reference only)