Details

---

BUY B3SA009Z https://www.utsource.net/itm/p/12608831.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Forward Voltage	VF	-	1.8	2.4	V	IF = 20 mA, Ta = 25掳C
Reverse Breakdown Voltage	VR	5	-	7	V	IR = 1 渭A, Ta = 25掳C
Forward Current (Continuous)	IF	-	-	20	mA	Ta = 25掳C
Peak Forward Current	IFSM	-	-	100	mA	t = 10 ms, Ta = 25掳C
Power Dissipation	PD	-	-	100	mW	Ta = 25掳C
Operating Temperature Range	Topr	-40	-	85	掳C
Storage Temperature Range	Tstg	-40	-	100	掳C
Wavelength	位D	620	625	635	nm	IF = 20 mA, Ta = 25掳C
Viewing Angle	胃	-	20掳	-	掳

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a flat, clean surface.
   • Use a soldering iron with a temperature not exceeding 300掳C.
   • Soldering time should not exceed 3 seconds.

2. Electrical Connections:

   • Connect the anode to the positive terminal of the power supply.
   • Connect the cathode to the negative terminal or ground.
   • Use a current-limiting resistor to ensure the forward current does not exceed 20 mA continuously.

3. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Avoid exposure to high humidity and corrosive environments.

4. Storage:

   • Store the device in a dry, cool place.
   • Keep away from direct sunlight and sources of heat.

5. Testing:

   • Test the device using a multimeter or a dedicated LED tester.
   • Ensure the test current does not exceed the maximum ratings.

6. Environmental Considerations:

   • Dispose of the device according to local regulations for electronic waste.
   • The device is RoHS compliant and lead-free.

(For reference only)