Details

---

BUY BD243C.. https://www.utsource.net/itm/p/12608834.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Collector-Emitter Voltage	VCE	-	-	80	V
Emitter-Base Voltage	VEB	-5	-	5	V
Collector-Base Voltage	VCB	-	-	80	V
Continuous Collector Current	IC	-	15	-	A
Pulse Collector Current (t = 10 ms, duty cycle 2%)	IC(pulse)	-	25	-	A
Power Dissipation (TA = 25掳C)	PTOT	-	125	-	W
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C
Operating Temperature Range	TA	-40	-	125	掳C
Thermal Resistance, Junction to Case	R胃JC	-	0.9	-	K/W

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the BD243C is mounted on a heatsink if it will be operating near its maximum power dissipation.
   • Handle the device with care to avoid mechanical damage and static discharge.

2. Biasing:

   • The base-emitter junction should be forward-biased for proper operation. Use a suitable base resistor to limit the base current and prevent damage.
   • Ensure that the base current (I_B) is sufficient to drive the collector current (I_C) as required by your application.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table, especially the collector-emitter voltage (V_CE), collector current (I_C), and power dissipation (P_TOT).
   • Operate within the specified temperature ranges to ensure reliable performance and longevity.

4. Thermal Management:

   • Use a heatsink to dissipate heat effectively, especially when the transistor is operating at high power levels.
   • Calculate the thermal resistance and ensure that the junction temperature (T_J) does not exceed 150掳C.

5. Storage and Transportation:

   • Store the BD243C in a dry, cool place away from direct sunlight and extreme temperatures.
   • Use anti-static packaging during transportation to protect the device from static damage.

6. Testing:

   • Before installing the BD243C in a circuit, test it using a multimeter or a transistor tester to ensure it is functioning correctly.
   • Verify the continuity and resistance values to confirm that the device is not damaged.

7. Soldering:

   • Use a low-wattage soldering iron to avoid overheating the device.
   • Ensure that the soldering time is kept to a minimum to prevent thermal stress.

By following these guidelines, you can ensure the reliable and efficient operation of the BD243C transistor in your circuits.

(For reference only)